UC Irvine

Quantitative data regarding photothermal and damage processes during pulsed laser irradiation of blood are necessary to achieve a better understanding of laser treatment of cutaneous vascular lesions and improve numerical models. In this study, multiple experimental techniques were employed to quantify the effects of single-pulse KTP laser (λ = 532 nm, τp = 10 ms) irradiation of whole blood in vitro: high-speed temperature measurement with a thermal camera in line-scan mode (8 kHz); optical coherence tomography (for determination of coagulum morphology); and transmission measurement with a co-aligned laser beam (λ = 635 nm). Threshold radiant exposures for coagulation (4.4-5.0 J/cm2) and ablation (approximately J/cm2) were identified. Thermal camera measurements indicated threshold coagulation temperatures of 90-100 °C, and peak temperatures of up to 145 °C for sub-ablation radiant exposures. Significant changes in coagulum thickness and consistency, and a corresponding decrease in transmission, were observed with increasing radiant exposure. The Arrhenius equation was shown to produce accurate predictions of coagulation onset (using appropriate rate process coefficients). The significance of dynamic effects such as evaporative loss and dynamic changes in optical properties was indicated. Implications for numerical modeling are discussed. Most importantly, the threshold temperatures typically quoted in the literature for pulsed laser coagulation (60-70 °C) and ablation (100 °C) of blood do not match the results of this study.