Lawrence Berkeley National Laboratory

We present results from an international model comparison study involving a series of controlled fault activation experiments in Opalinus Clay at the Mont Terri Laboratory, Switzerland. The fault activation experiments were conducted in situ by water injection at variable pressure from boreholes targeting different parts of the Main Fault crossing several tunnels and galleries of the Mont Terri Laboratory. The model simulations focused on (1) an experiment activating a discontinuity (fracture or minor fault) within the damage zone of the main fault, and (2) an experiment activating discontinuities close to the core of the Main Fault. The experimental data consist of coupled hydraulic and mechanical responses monitored at an injection borehole and a monitoring borehole located a few meters away. After overcoming several modeling issues along with necessary model developments, a reasonably good agreement was achieved between the modeling results and the field observations. The fault activation experiments displayed an abrupt flow rate increase associated with a sudden fracture opening and rupture propagation after the injection pressure reached above the estimated normal stress on the fracture. This was followed by an abrupt flow rate decrease, indicating hydraulic closing, once the injection pressure decreases to an estimated 1–2 MPa below the stress normal to the opened fracture. The models were able to capture this abrupt hydromechanical behavior, including an observed dominant opening behavior along with the rupture propagation, while the spatial extent of the shear rupture and the quantity of peak injection flow were the most challenging to predict.